Home ﹥ Products > Power Distribution > Metered PDUs > LED Matered PDUs > Rackmount LED meter PDU with 12-Outlet C13 20A 3 meters Power Cord
Rackmount LED meter PDU with 12-Outlet C13 20A 3 meters Power Cord
-
Configure a LED digital meter which could read the PDU current and voltage electrical information.
- LED meter could display the current and voltage value (automatically switch display around 5 seconds)
- Surge Protection: Max total surge absorb current 6,500A. Max total surge absorb energy : 220J Joule.
- Recoverable 20A Overload protection device (with 20A breaker protector)
- If the meter fails, the PDU can continue to supply power. You could replace the meter by hot plugging without power off.
- Power cord and sockets design in the reverse sides. Easily wire trimming.
-
Anti-shedding power socket design. Effectively prevent the power cord from falling off
- Complied with UL safety certification power plug, sockets,breaker protector compnents.
- Chassis material: Galvanized steel sheet, thermosetting power paint. The outer surface is completely insulated.
- Optional 10 cm long hanger, retreat the PDU, avoid plugs colliding with cabinet door panels.
- Installable in the 19 inches Cabinet. 1U PDU mounted horizontally. 0U mounted inward, outward vertically.
- The maximum total current can be selected from 15A, 20A, 30A.
- The input plug can be customized to 5-15P, L5, L6 plug or other special specifications; the length of power cord can be customized.
Specification / Part No.
PDU-ME-C13(12)-515P
Interface
Output Socket
(12) IEC60320-C13
Input Plug
(1) NEMA 5-15P Insepable 3 meters power cord
Electrical Characteristics
Operation Voltage
50V ~300V AC
Frequency
50~60Hz
Load Current
20 Ampere (Amp) / max.
Overload Protection
20 A Recoverable breaker protector *1pcs
LED Meter
Display : 3 digits (2 integer +1 decimal), with red LED
Voltage measurement range : 50 ~300V AC
Current measurement range : 0.1A ~50A (It will display 0.0A when it is lower than 0.1A.)
Precision : ±10％ or 2 units (Average method calculation)
Switch display voltage and current: automatically switch display in 5 seconds
Update frequency ：10 times / per second
Operation temperature : -10˚C ~ 60˚C
outline Dimensions
483 x 44x 44 mm ( WDH)
Net Weight
1.5 kg
